Enerpac SFP613SW - Electric Pump - Split Flow - Partbase
*:Delivery times are not binding and subject to change.
**:The origin information of the products is for orientation only. The actual origin may differ. This does not guarantee any benefits related to import advantages or availability from certain countries.
***:All product specifications, technical data and images are provided without warranty. Product images sometimes serve as symbolic images and may differ from the actual item.
The Enerpac article SFP613SW typically requires annual UVV safety inspections according to § 14 BetrSichV and DGUV regulations (e.g. DGUV regulation 3, 100-500) to ensure workplace safety. Through our partner WK Hydraulik, who operates a certified Enerpac Service Center, we carry out these inspections for you.
For lifting and lowering applications on multiple points, Split-Flow Pumps are a far better alternative than using independently operated pumps. Where synchronization of maximum 4% is acceptable, Split-Flow Pumps are a safe and economical solution.
The SFP-Series pumps feature both single and synchronized multiple outlet control either through joystick or pendant operation
Individual or simultaneous operation of valves, with advance/hold/retract function
For double- and single-acting cylinders
Adjustable pressure relief valve per circuit
Pressure gauge included
Features for SFP613SW from Enerpac
Dimension
Value
type
Hydraulic Pump
Subtypes
Electric Pump - Split Flow
Series
SFP
Maximum operating pressure in bar
700
Maximum delivery volume at nominal pressure
1.30 l/min
Tank content (cm3)
150000
Duty Cycle
Extended
Maximum Flow at Rated Pressure (litres)
1.3
Motor voltage
380-415 V
Motor phases
3 phase
Motor hertz
50 Hz
Reservoir size ranges (liters)
> 40
Areas of maximum operating pressure (bar)
700
Maximum delivery volume at nominal pressure
1.30 l/min
Pump control
Pendant
Valve function
Advance / Hold / Retract
Valve operation
Solenoid
Valve type
4-way, 3-position
Motor Technical Data
400 V, 3 Ph, 50 Hz
Reservoir Capacity (inches3)
9,154
Tank content (liters)
150
Number of outputs
6
Motor power (kW)
11
Solenoid Valve Voltage
24 VAC
Type of drive
Electric
Cylinder compatibility
Single-acting, Double-acting
Oil flow per outlet at 700 bar (l/min)
1,30
Output flow rate at 100 psi in 3 minutes
78
Output Flow Rate 10000 Psi In3/min
78
Maximum flow rate ranges at rated pressure (l/min)
The Enerpac article SFP613SW typically requires annual UVV safety inspections according to § 14 BetrSichV and DGUV regulations (e.g. DGUV regulation 3, 100-500) to ensure workplace safety. Through our partner WK Hydraulik, who operates a certified Enerpac Service Center, we carry out these inspections for you.