*:Delivery times are not binding and subject to change.
**:The origin information of the products is for orientation only. The actual origin may differ. This does not guarantee any benefits related to import advantages or availability from certain countries.
***:All product specifications, technical data and images are provided without warranty. Product images sometimes serve as symbolic images and may differ from the actual item.
The Enerpac article SFP202MW typically requires annual UVV safety inspections according to § 14 BetrSichV and DGUV regulations (e.g. DGUV regulation 3, 100-500) to ensure workplace safety. Through our partner WK Hydraulik, who operates a certified Enerpac Service Center, we carry out these inspections for you.
For lifting applications with multiple lifting points, pumps with split flow represent a much better alternative than individually operated pumps. If synchronization of up to 4% is acceptable and the load is evenly distributed over the lifting points, pumps with split volume are a safe and economical solution. The pumps of the SFP series offer controls for both individual (via joystick) and multiple synchronized (via remote control) outputs. Valves operated individually or simultaneously for extend/stop/retract functions. For double-acting and single-acting cylinders. Adjustable pressure relief valve per circuit.
Features for SFP202MW from Enerpac
Dimension
Value
type
Hydraulic Pump
Subtypes
Electric pump - divided delivery volume
Series
SFP
Maximum operating pressure in bar
700
Maximum delivery volume at nominal pressure
0.27 l/min
Tank content (cm3)
10000
Duty Cycle
Extended
Maximum Flow at Rated Pressure (litres)
0.27
Motor voltage
380-415 V
Motor phases
3 phase
Motor hertz
50 Hz
Reservoir size ranges (liters)
0 - 20,0
Reservoir size ranges (in gallons)
0 - 5
Areas of maximum operating pressure (bar)
700
Maximum delivery volume at nominal pressure
0.27 l/min
Pump control
Joystick
Valve function
Extend / Stop / Retract
Valve operation
Manual
Valve type
4/3-way valve
Motor Technical Data
400 V, 3 Ph, 50 Hz
Valve tension
24 VDC
Reservoir Capacity (inches3)
578
Tank content (liters)
10
Reservoir capacity (gallon)
2.5
Number of outputs
2
Motor power (kW)
0,75
Solenoid Valve Voltage
24 VDC
Type of drive
Electric
Cylinder compatibility
Single-acting, Double-acting
Oil flow per outlet at 700 bar (l/min)
0,27
Output flow rate at 100 psi in 3 minutes
20
Output Flow Rate 10000 Psi In3/min
20
Maximum flow rate ranges at rated pressure (l/min)
The Enerpac article SFP202MW typically requires annual UVV safety inspections according to § 14 BetrSichV and DGUV regulations (e.g. DGUV regulation 3, 100-500) to ensure workplace safety. Through our partner WK Hydraulik, who operates a certified Enerpac Service Center, we carry out these inspections for you.