*:Delivery times are not binding and subject to change.
**:The origin information of the products is for orientation only. The actual origin may differ. This does not guarantee any benefits related to import advantages or availability from certain countries.
***:All product specifications, technical data and images are provided without warranty. Product images sometimes serve as symbolic images and may differ from the actual item.
The Enerpac article EVOP180150J typically requires annual UVV safety inspections according to § 14 BetrSichV and DGUV regulations (e.g. DGUV regulation 3, 100-500) to ensure workplace safety. Through our partner WK Hydraulik, who operates a certified Enerpac Service Center, we carry out these inspections for you.
Synchronous hub system controls multiple lifting points. Each pump in the EVOP series (one pump per lifting point) controls only one lifting point, thus perfectly combining high delivery volume with exceptional accuracy. Ideal for heavy-duty cylinders with 300 to 1000 t capacity. Higher lifting speed for long-stroke cylinders and repetitive operations as in step lifting systems. Up to 8x higher lifting speed compared to other methods. Synchronization controlled by an adjustable drive frequency (VFD) on the motor enables even better operation and high accuracy at high lifting speeds. Standardized control user interface allows easy setup and operation/selection of multiple lifting options. Accuracy of 1.0 mm (0.040 inches) between leading and following cylinders. Integrated warning and stop alarm signals for optimal safety.
Features for EVOP180150J from Enerpac
Dimension
Value
type
Hydraulic Pump
Subtypes
Electric pump - Synchronous hub systems
Series
EVOP
Maximum operating pressure in bar
700
Maximum operating pressure in psi
10,000
Maximum delivery volume at nominal pressure
8.0 l/min
Maximum delivery volume at nominal pressure
488 in³/min
Tank content (cm3)
150000
Duty Cycle
Extended
Usable oil volume (liters)
150
Maximum Flow at Rated Pressure (in3)
488
Maximum Flow at Rated Pressure (litres)
8,0
Number of lifting points
1
Motor voltage
460-480 V
Motor phases
3 phase
Motor hertz
50/60 Hz
Areas of maximum operating pressure (psi)
10,000
Reservoir size ranges (in gallons)
> 10
Areas of maximum operating pressure (bar)
700
Maximum delivery volume at nominal pressure
488 in³/min
Valve operation
Electromagnet
Valve type
4 ways, 3 positions
Accuracy over full stroke
1 mm
Motor Technical Data
460-480 V, 3 Ph, 50/60 Hz
Reservoir Capacity (inches3)
9153
Reservoir capacity (gallon)
40
Number of outputs
1
Motor power (kW)
15
Motor power (Hp)
20
Type of drive
Electric
Cylinder compatibility
Single-acting, Double-acting
Variable output flow high pressure greater than 125 bar per minute
2,4-8,0
Dimension C (inches)
31.69
Dimension B (inches)
49.21
Output flow rate at 100 psi in 3 minutes
1037
Output Flow Rate 10000 Psi In3/min
488
Variable output flow low pressure less than 1800 psi in 3 min
311-1037
Variable output flow low pressure less than 125 bar per minute
5,1-17,0
Maximum flow rate ranges at rated pressure in 3 min
> 200
Dimension A (inches)
53.86
Maximum flow rate ranges at rated pressure (l/min)
> 3,27
Dimension C (mm)
805
Dimension B (mm)
1250
Dimension A (mm)
1368
Variable output flow high pressure greater than 1800 psi in 3 minutes
The Enerpac article EVOP180150J typically requires annual UVV safety inspections according to § 14 BetrSichV and DGUV regulations (e.g. DGUV regulation 3, 100-500) to ensure workplace safety. Through our partner WK Hydraulik, who operates a certified Enerpac Service Center, we carry out these inspections for you.