Festo Semi-rotary driveManufacturer type key:

Price & Availability

Availability:
Shipping Area:
entire EU·No minimum order value|

Found it cheaper elsewhere? Send us the offer as a link or PDF, we usually match it.

Packaging Unit:
1 piece
We accept
Invoice
Prepayment
Visa
Mastercard
American Express
PayPal
Eps
Ideal
Przelewy24
We also supplyView range

Fittings & hoses

Threaded fittings, couplings, valves and hoses in brass, stainless steel and plastic.

Support

Advice on selection, alternatives and availability

Partbase Support, SupportFranz Bewerunge, SupportOle Dening, Support
Mon - Fri from 8:00 AM - 6:00 PM
+49 39203 863988 (German & English)sales@partbase.com (all languages)
Featured in
  • konstruktionspraxis
  • O+P Fluidtechnik
  • e-commerce magazin
  • Industrieanzeiger
Also via
  • Conrad Marketplace
  • SAP Ariba
  • Simple System

Features for 8084145 from Festo

Actuator size
1200
Flange hole pattern
F1012
Swivel angle
90 deg
Adjustment range of end position at 0°
-5 deg ... 5 deg
Adjustment range of end position at nominal swivel angle
-5 deg ... 5 deg
Shaft connection depth
29 mm
Standard for valve connection
ISO 5211
Mounting position
any
Mode of operation
single-acting
Construction
Rack and pinion
Closing direction
clockwise closing
Symbol
00991266
Valve connection conforms to standard
VDI/VDE 3845 (NAMUR)
Connection point for positioner and position transmitter conforms to standard
VDI/VDE 3845 size AA 3
Device type to VDMA 66413
Safety component
Safety function
The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is performed by the spring force of the spring assembly.
Safety Integrity Level (SIL)
up to SIL 2 low demand modeup to SIL 3 in a redundant architectureup to SIL 1 high demand mode
Certified for safety function to ISO 13849 and IEC 61508 (SIL)
Product can be used in SRP/CS up to SIL 2 low demandProduct can be used in SRP/CS up to SIL 1 high demandup to SIL 3 in a redundant architecture
Burst pressure
24 bar
Operating pressure
0.2 MPa ... 0.8 MPa
Operating pressure
2 bar ... 8 bar
Operating pressure
29 psi ... 116 psi
Nominal operating pressure
0.6 MPa
Nominal operating pressure
6 bar
Nominal operating pressure
87 psi
Maritime classification
see certificate
CE mark (see declaration of conformity)
to EU Explosion Protection Directive (ATEX)
UKCA mark (see declaration of conformity)
to UK EX regulations
Ex protection approval outside the EU
EPL Db (GB)EPL Gb (GB)
Explosion protection
Zone 1 (ATEX)Zone 1 (UKEX)Zone 2 (ATEX)Zone 21 (ATEX)Zone 21 (UKEX)Zone 22 (ATEX)
Certificate issuing body
DNV TAP00001CETÜV Rheinland 968/V 1106.01/2023
ATEX category, gas
II 2G
ATEX category, dust
II 2D
Ex ignition protection type, gas
Ex h IIC T4 Gb X
Ex ignition protection type, dust
Ex h IIIC T105°C Db X
Ex ambient temperature
-20°C <= Ta <= +80°C
Operating medium
Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating/pilot medium
Dew point min. 10 °C below the ambient and medium temperatureLubricated operation possible (subsequently required for further operation)
LABS conformity
VDMA24364-B1/B2-L
Storage temperature
-20 °C ... 60 °C
Ambient temperature
-20 °C ... 80 °C
Torque at nominal operating pressure and 0° swivel angle
796.3 Nm
Torque at nominal operating pressure and 90° swivel angle
477.2 Nm
Note on torque
The operating torque of the drive must not be higher than the maximum permissible torque specified in ISO 5211 for the size of the mounting flange and coupling.
Spring return torque at swivel angle 0°
479.4 Nm
Spring return torque at swivel angle 90°
798.6 Nm
Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0°
43.5 l
Shaft connection
T27
Pneumatic connection
G1/4
Materials note
RoHS-compliant
Connecting plate material
Wrought aluminium alloy, coated
Cover material
Die-cast aluminium, coated
Seal material
NBR
Spring material
Spring steel
Housing material
Aluminium, powder-coated
Piston material
Die-cast aluminium
Bearing material
POM
Cam material
Steel
Screw material
High-alloy stainless steel
Shaft material
High-alloy stainless steel
Documents

Manufacturer article description

The DFPD series features a rack-and-pinion combination with a constant torque curve over the entire swivel angle range. With the semi-rotary drives DFPD, you can automate butterfly valves, ball valves and air dampers optimally.

Further information for 8084145 from Festo

Article authenticity
Original article
Article condition
New
Single weight
43,02 kg
Dimensions (L x W x H)
not available
Country of origin**
On request
Customs goods number
84123900
GTIN
4052568449506
RoHS compliant
Yes
Manufacturer
Festo

Support

Support Mitarbeiter

How can we help?

Get in touch with our support team

Opening hours
Mon - Fri from 8:00 AM - 6:00 PM
sales@partbase.com
+49 39203 863988

Payment Methods

Invoice
Prepayment
Visa
Mastercard
American Express
PayPal
Eps
Ideal
Przelewy24

Our Advantages

Top Prices
High Availability
Large Portfolio
Flexible Payment Methods