*:Delivery times are not binding and subject to change.
**:The origin information of the products is for orientation only. The actual origin may differ. This does not guarantee any benefits related to import advantages or availability from certain countries.
***:All product specifications, technical data and images are provided without warranty. Product images sometimes serve as symbolic images and may differ from the actual item.
The Enerpac article SCJ-100 typically requires annual UVV safety inspections according to § 14 BetrSichV and DGUV regulations (e.g. DGUV regulation 3, 100-500) to ensure workplace safety. Through our partner WK Hydraulik, who operates a certified Enerpac Service Center, we carry out these inspections for you.
The system is automatically mechanically locked after the stroke for lifting or lowering. Self-aligning steel support blocks save time, improve side load, and eliminate the need for wood blocks. Simplified operation with 50% fewer cycles than step lifting systems allows work to be performed more efficiently. End block with adjustable swivel pressure piece allows fine adjustment during configuration: 50 mm adjustable movable pressure piece. Low starting height of 558 mm; max. lifting height up to 3006 mm. Can be operated with Enerpac 700 bar hydraulic power units. Tested by Lloyds to 125% of maximum load capacity. Simple operation: Connect the Cube Jacks to the pump with split delivery volume from Enerpac and select the lifting mode on each base lifting frame. Insert a support block and activate the Cube Jack until the support block clicks into the locking mechanism. Retract the lifter and repeat the process until the desired lifting height is reached. For the lowering process, select the lowering mode on each base lifting frame and reverse the process.
Features for SCJ-100 from Enerpac
Dimension
Value
type
JackUpSystem
Subtypes
Self-locking cube jack
Series
SCJ
Compatible products
SFP404SJ
SFP409SJ
SFP604SJ
SFP613SJ
SFP813SJ
SFP404SW
SFP409SW
SFP604SW
SFP613SW
SFP813SW
Maximum operating pressure in bar
700
Maximum operating pressure in psi
10,000
Adjustable stroke swivel saddle (mm)
50
Lifting stroke (mm)
156
Lifting capacity per base unit (kN)
1000
Lift capacity per base unit (metric ton)
100
Base block weight (lbs)
51.7
End block weight (lbs)
220
Basic unit weight (lbs)
1804
Oil quantity per base unit, running in (inches3)
85
Oil quantity per base unit, extension (inches3)
152
Maximum side load (m)
1,5% @ 3m
Adjustable stroke swivel saddle
2
Lifting stroke
6.14
Hub capacity per base unit (imperial ton)
110
Oil quantity per base unit, traveling (cm3)
1400
Basic unit weight (kg)
820
Oil quantity per base unit, extension (cm3)
2500
End block weight (kg)
100
Base block weight (kg)
23,5
Maximum side load (ft)
1.5% @ 9.8
Dimension G (mm)
772
Dimension E (inches)
25.8
Dimension L (mm)
504
DimensionPmax_in
9.4
Dimension F (mm)
636
DimensionM_in
17.7
Dimension D (inches)
19.9
Dimension Pm (inches)
189
Dimension C (inches)
20.7
Dimension K (inches)
41.2
dimensionL_in
19.8
DimensionPmax_mm
239
Dimension E (mm)
655
Dimension B (inches)
118.3
Dimension J (inches)
6.69
MinimumHeightIncludingEndBlockIn
21.97
Dimension Pm (inches)
7.4
Dimension D (mm)
506
Dimension A (inches)
22
Dimension K (mm)
1046
DimensionQ_in
4.9
Maximum lifting height with 11cb and 50mm swivel saddle screw_mm
3006
Dimension C (mm)
526
Dimension I (mm)
101
Dimension J (mm)
170
Dimension H (inches)
23.5
DimensionN_mm
460
Minimum height including end block (mm)
558
Maximum lifting height with 11cb and swivel saddle screw
The Enerpac article SCJ-100 typically requires annual UVV safety inspections according to § 14 BetrSichV and DGUV regulations (e.g. DGUV regulation 3, 100-500) to ensure workplace safety. Through our partner WK Hydraulik, who operates a certified Enerpac Service Center, we carry out these inspections for you.