*:Delivery times are not binding and subject to change.
**:The origin information of the products is for orientation only. The actual origin may differ. This does not guarantee any benefits related to import advantages or availability from certain countries.
***:All product specifications, technical data and images are provided without warranty. Product images sometimes serve as symbolic images and may differ from the actual item.
The Enerpac article EVO821380 typically requires annual UVV safety inspections according to § 14 BetrSichV and DGUV regulations (e.g. DGUV regulation 3, 100-500) to ensure workplace safety. Through our partner WK Hydraulik, who operates a certified Enerpac Service Center, we carry out these inspections for you.
Modular lifting pumps for controlling 8 lifting points. Can be connected to single or double-acting cylinders with the same or different lifting capacity. PLC-controlled system with integrated 700 bar hydraulic drive and 250-liter tank. Network capability to wirelessly connect up to 4 HPUs to a separate main control unit. Intuitive user interface for easy configuration, control, and navigation. Data storage and recording capabilities. Motor with variable frequency drive (VFD) and PLC for precise synchronization and flow monitoring. The application possibilities of the EVO system are unlimited; it can be used to drive interconnected hydraulic cylinders (single or double-acting), push or pull cylinders, step lifts, hollow piston or setting ring cylinders. The EVO system offers 9 operating modes. The operator can navigate to each of these menus: 1. Manual, 2. Pre-tensioning, 3. Automatic, 4. Quick retraction, 5. Pressure relief, 6. Tilting, 7. Step lifting, 8. Weighing (available for EVO-W models), 9. Center of gravity determination (available for EVO-W models).
Features for EVO821380 from Enerpac
Dimension
Value
type
Hydraulic Pump
Subtypes
Electric pump - Synchronous hub systems
Series
EVO
Maximum operating pressure in bar
700
Maximum operating pressure in psi
10,000
Maximum delivery volume at nominal pressure
1.12 l/min
Maximum delivery volume at nominal pressure
128 in³/min
Tank content (cm3)
250000
Duty Cycle
Extended
Usable oil volume (liters)
250
Maximum Flow at Rated Pressure (in3)
128
Maximum Flow at Rated Pressure (litres)
2,1
Number of lifting points
8
Motor voltage
380-415 V
Motor phases
3 phase
Motor hertz
50/60 Hz
Areas of maximum operating pressure (psi)
10,000
Reservoir size ranges (in gallons)
> 10
Areas of maximum operating pressure (bar)
700
Maximum delivery volume at nominal pressure
2.1 l/min
Valve operation
Electromagnet
Valve type
4-way, 3-position
Accuracy over full stroke
1 mm
Motor Technical Data
380-415 V, 3 Ph, 50-60 Hz
Reservoir Capacity (inches3)
15,246
Reservoir capacity (gallon)
66
Number of outputs
8
Motor power (Hp)
4
Type of drive
Electric
Cylinder compatibility
Single-acting, Double-acting
Variable output flow high pressure greater than 125 bar per minute
0,6-2,1
Dimension C (inches)
47.25
Dimension B (inches)
50.75
Output flow rate at 100 psi in 3 minutes
677
Output Flow Rate 10000 Psi In3/min
128
Variable output flow low pressure less than 1800 psi in 3 min
201-677
Variable output flow low pressure less than 125 bar per minute
3,3-11,1
Maximum flow rate ranges at rated pressure in 3 min
120 - 200
Dimension A (inches)
56
Maximum flow rate ranges at rated pressure (l/min)
1,96 - 3,27
Dimension C (mm)
1200
Dimension B (mm)
1290
Dimension A (mm)
1422
Variable output flow high pressure greater than 1800 psi in 3 minutes
The Enerpac article EVO821380 typically requires annual UVV safety inspections according to § 14 BetrSichV and DGUV regulations (e.g. DGUV regulation 3, 100-500) to ensure workplace safety. Through our partner WK Hydraulik, who operates a certified Enerpac Service Center, we carry out these inspections for you.