type | Hydraulic Pump |
Subtypes | Electric pump - Torque wrench |
Series | ZE5T |
Maximum operating pressure in bar | 700 |
Maximum operating pressure in psi | 10,000 |
Maximum delivery volume at nominal pressure | 1.6 l/min |
Maximum delivery volume at nominal pressure | 120 in³/min |
Tank content (cm3) | 8000 |
Duty Cycle | Extended |
Overpressure valve adjustment range (psi) | 1,000 - 11,600 |
Usable oil volume (liters) | 8,0 |
Maximum Flow at Rated Pressure (in3) | 120 |
Maximum Flow at Rated Pressure (litres) | 1.6 |
Noise level (dBA) | 75 |
Setting of the pressure limiting valve (bar) | 70 - 800 |
Motor voltage | 380-415 V |
Motor phases | 3 phase |
Motor hertz | 50/60 Hz |
Areas of maximum operating pressure (psi) | 10,000 |
Areas of maximum operating pressure (bar) | 700 |
Maximum delivery volume at nominal pressure | 1.6 l/min |
Valve operation | Electromagnet |
Valve type | 3-way, 2-position |
Motor Technical Data | 400 V, 3 Ph, 50/60 Hz |
For the following torque wrenches | All S and W series |
Reservoir Capacity (inches3) | 416 |
Usable oil capacity (gallon) | 2 |
Motor power (rpm) | 1750 |
Motor power (Hp) | 3 |
Valve model | VM32 |
Type of drive | Electric |
OutputFlowRate at 50 bar (l/min) | 11,2 |
Output flow rate at 7 bar in 3 minutes | 11,8 |
Output flow rate at 100 psi in 3 minutes | 850 |
Output flow rate 700 bar in 3 minutes | 1,6 |
Output flow rate at 7 bar (l/min) | 11,8 |
Output Flow Rate 10000 Psi In3/min | 120 |
Maximum flow rate ranges at rated pressure in 3 min | 120 - 200 |
OutputFlowRate700PsiIn3min | 825 |
Output Flow Rate 700 bar l/min | 1,6 |
OutputFlowRate5000PsiIn3min | 123 |
Maximum flow rate ranges at rated pressure (l/min) | 0,98 - 1,95 |
Output Flow Rate 350 bar l/min | 1,7 |
Output flow rate at 50 bar in 3 minutes | 11,2 |
OutputFlowRate350barIn3min | 1,7 |